Booth without Wallspace Details *Table (150 x 45 cm)
Table size: 150 cm (width) x 45 cm (depth) x 70 cm (height)
▼Other Notices
*Includes a white cardboard cover
*Cover dimensions may differ from the actual measurements due to folds
*Chairs: 2 per booth
Exhibitors without wallspace may not place panels, hanger racks, or other fixtures in the space behind their table.
You may place fixtures on top of the table, but please be mindful of neighboring exhibitors.
Booth without Wallspace Details *Table (90 x 45 cm)
Table
Table size: 90 cm (width) x 45 cm (depth) x 70 cm (height)
▼Other Notices
*Includes a white cardboard cover
*Cover dimensions may differ from the actual measurements due to folds
*Chair: 1 per booth
Exhibitors without wallspace may not place panels, hanger racks, or other fixtures in the space behind their table.
You may place fixtures on top of the table, but please be mindful of neighboring exhibitors.
Booth with Wallspace Details
Table
Table size: 150 cm (width) x 45 cm (depth) x 70 cm (height)
▼Other Notices
*Includes a white cardboard cover
*Cover dimensions may differ from the actual measurements due to folds
*Chairs: 2per booth
Wall ※Constructed wallspace
Wallspace dimensions 150 cm (width) x 120 cm (height)
How to Use Wallspace
*You may only use the provided constructed wallspace. The museum's walls or any other structure at the venue may not be used under any circumstances.
*We do not provide any rental tools to assist with your wall set-up. Please prepare your own items.
*Do not drill or make any holes in the constructed wall ‒ exhibitors are not permitted to use nails, screws, thumbtacks, or other similar fixtures. Ensure to restore your wallspace to its original state after use.
*The wall is made of plywood board; it is not perforated.
*The lowermost edge of the constructed wallspace is approximately 90 cm from the floor and the uppermost edge is approximately 210 cm from the floor. (Please refer to the above diagram)
*The wall has 5.5 mm-wide slits at 40 cm intervals of 40 cm. Hooks and metal fixtures can be affixed to these slits for boards and shelves.
*Do not use strong adhesive tapes for wall decorations.
*During the de-install, ensure to remove ALL displayed decorative/installation items (including cut-out stickers, double-sided tape).
Recommended Items for Wallspace Use: ZINE’S MATE (B2F)
● Hooks or shelf brackets can be attached to the 5.5mm wide slits at 40cm intervals. If you are bringing your own hooks, we recommend “double hooks” with a rod diameter of 4-5mm and two supports.
*Images are for illustration purposes only
Example Hooks: https://www.store-express.com/shop/g/g61-123-8-1
● If you are building your own shelves, we recommend the following configuration.
Two double hooks with a 5mm diameter and two supports + a board of matched to the shaft length
*Images are for illustration purposes only
Reference examples:
Hooks x2 Product name:
Hook T dai cap kuro anapicchi 25.4 mm (large T hook, black caps, hole pitch 25.4 mm) /
approx. 58 mm x 170(165) mm x 29 mm, hole diameter 5 mm
https://www.monotaro.com/p/1634/5543/
Board: width 600mm x 15mm (on sale at hardware centers, Tokyu Hands, etc.)
*Please use adhesive tape to attach objects to the wall (for double-sided tape we recommend Command Tab). You can find adhesive tape on Amazon, Rakuten, ASKUL, Monotaro, Store Express, etc.